Vogelzang International TR001B, Owner'S Manual

Page: 5 / 52

-5-
4. Align the holes of the left and right pedestal side
to the pegs located on the bottom base. Secure
the pedestal sides to the base using the four (4)
provided 1/4-20 kep nuts.
5. Slide the two tabs located on the bottom of the
pedestal front into the slots located on the bottom
base.
6. Secure the pedestal front to the left and right
pedestal sides using the four (4) provided 1/4-20
weldnuts as shown.
7. Slide the heat shield onto the set screws that
were previously installed in step 3. Next slide the
log storage onto the same set screws as the heat
shield.
8. Use the provided eight (8) washers, and 1/4-20
kep nuts to secure the heat shield and log storage
into place.
9. Use four (4) #10 X 1/2 bolts to attach the insulation
support to the bottom side of the insulation
brackets located on the left and right pedestal
sides as shown.
10. Install the kao wool insulation and secure with the
four (4) provided insulation holders as shown.
11. Carefully set the stove back into the upright
position. Attach the back panel as shown using
the four (4) provided #10 X 1/2 bolts.
Caution! The appliance is very heavy. The assistance
from a second person is strongly suggested. Please
use proper lifting technique when positioning the
appliance for assembly and installation.
Warning: Do not fire the unit without insulation in its
intended location.