PFW 6852
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
Universal Bracket
Adapter Plate
Mount Stub
Alignment Stub
1) Place the Universal Bracket assembly on the back of the display,
with the threaded mount studs on the Adapter Plates passing
through the mount slots on the Universal Brackets.
2) Place one (1) 5/16" washer and one (1) M8 Nylon nut on each
threaded mount stud.
3) Use a socket wrench and 1/2" socket to tighten all M8 Nylon Nuts.
4) Use a screwdriver and tighten the mounting hardware determined
in the
"Selecting the Mounting Hardware" section.
1) Center the Universal Bracket Bar.
2) Use the 5/32" Allen Wrench to tighten the set screws that
are located on the back of each Universal Bracket.
Caution!
Do not overtighten the set screws.
Note
Make certain that the two Alignment Stubs on each Adapter
Plate are properly seated in the Universal Bracket slots. The
Alignment Stubs help keep the Universal Bracket assembly
aligned and level during installation.
Set Screws
PFW 6852
www.vogels.com | Europe +31 (0)40 26 47 400
Page 11
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
20
21
www.vogels.com | Europe +31 (0)40 26 47 400
Page 11
