Depth Mode
CORRECT WAY OF SWEEPING
Shaft height is wrong
accurate results.
Wrong search coil angle
Incorrect way of sweeping
CORRECT USE
CORRECT WAY OF SWEEPING
Shaft height is wrong
accurate results.
Wrong search coil angle
Incorrect way of sweeping
This mode depends on the latest analysis and processing algorithms for the data generated
during the search process to determine the depth of the target discovered through the
search using one of the previous search modes. When a target is detected, we have to
measure the dimensions of the target by defining the starting point and the endpoint. Then
go to the depth mode, by detect on the depth mode icon and then press the enter button to
show the depth mode interface, which asks the user to enter the length of the approximate
distance by pressing the move buttons to increase or decrease the value by 10 cm and then
press the enter button to show the expected depth value for the detected target.
Show the expected value of target depth.
Page 25
DEPTH MODE
Depth
ENTER THE MEASUREMENT
OF TARGET
DEPTH
10
CM
?
CM
TARGET
DEPTH MODE
Depth
ENTER THE MEASUREMENT
OF TARGET
60
CM
DEPTH
10
CM
?
CM
TARGET
Change the target distance length
