Getting Connected
15
Connecting both Analog and Digital Audio
To do this you will need a Dolby Digital DTS/AC-3 receiver with analog audio inputs. Refer to the above
instructions for each connection (digital and analog).
Connecting to a TV with an RCA Connection
Using either the yellow-ended RCA plug from the included RCA patch cable or a separate RCA patch cable,
connect one end to the RCA VIDEO OUTPUT jack on the DVG-380K and connect the other end to the VIDEO
INPUT jack on our TV or monitor device.
Connecting to a TV with an RF Modulator
If your TV has only a RF-style Jack, such as Antenna In or 75 ohm, and no RCA video input jack, you can connect
video with a RF modulator (not supplied). Ask your dealer for details on RF modulator availability and compatibility.
Follow the instructions provided with the RF modulator to connect the DVG-380K to your TV. (General model
shown as an example).
Connecting to a TV with a VCR
You can also use a VCR to connect video to a TV with no RCA video input. You will need an RCA cable and a 75-
ohm "coaxial" type cable. Using the RCA video cable, connect one end to the VIDEO OUTPUT jack on the DVG-
380K and connect the other end of the cable to the VIDEO INPUT of a VCR. Then, using the 75-ohm "coaxial"
type cable, connect one end to the RF OUTPUT of the VCR, and connect the other end to the 75-ohm TV
ANTENNA INPUT jack.
Connecting to a TV with S-Video
Using an S-Video cable, connect one end to the DVG-380K’s S-VIDEO OUTPUT jack and connect the other end
to the S-VIDEO IN jack on your television.
Connecting to a TV with Component Video
Using 3 appropriate Component Video cables (usually color coded red, blue and green), connect a set of plugs to
the COMPONENT VIDEO OUT jacks (Y Cb Cr) on the DVG-380K and plug the other set of plugs to your
COMPONENT VIDEO IN jacks (Y Cb Cr) on your television. Ä On some TV’s the component video input jacks
may be labeled (Y Pb Pr). Ä You will need to press the MODE button on the remote control to toggle between non-
interlaced (HDTV) and interlaced (STANDARD) video output. You can only use the MODE button when there is no
disc inserted in the disc tray.
Connecting to a HDTV or Monitor Device
To connect video to a HDTV or monitor device you can use either a Component Video or HD-15 VGA connection.
For a COMPONENT VIDEO connection, refer to the above instructions. For a HD-15 VGA connection, using a HD-
15 VGA video cable, connect one end to the HD-15 VIDEO OUT connector on the DVG-380K and connect the
other end to a HD-15 VGA VIDEO INPUT on your HDTV or monitor device. Ä You will need to press the MODE
button on the remote control to toggle between non-interlaced (HDTV) and interlaced (STANDARD) video output.
You can only use the MODE button when there is no disc inserted in the disc tray.
Connecting both Analog and Digital Audio
To do this you will need a Dolby Digital DTS/AC-3 receiver with analog audio inputs. Refer to the above
instructions for each connection (digital and analog).
Amplifier
Center
Subwoofer
Surround Left
Surround Right
Right
Left
(Cable not included)
Digital Connection
Anolog Connection
1
!
WARNING
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
5.1CH AUDIO OUT COMPONENT/PROGRESSIVE
FL FR
SW
SL
SR
CENTER
Y
Cb/Pb
Cr/Pr
L
R
COAXIAL VIDEO OPTICAL
AUDIO OUT
S VIDEO
VIDEO
"DTS" and "DTS Digital out" are trademarks of Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories
"Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUCT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
WWW.VOCOPRO.COM
DVD PLAYER
MODEL NO.: DVG-380K
POWER SUPPLY: 100-240V50/60Hz
POWER CONSUMPTIONS: 28W
La Verne California U.S.A.
SERIAL NO.
100-240V~
50/60Hz
VGA OUTPUT
