velocity) will control the filter. The WAH-WAH AUTO effect can also be enabled via MIDI, see
the section on MIDI CONTROLLED EFFECTS for more information.
TRANSPOSE
: Used to change the musical key which the ELECTRIC PIANO will play. This
control is helpful for utilizing different ranges of notes on your keyboard especially if your
keyboard is 5 octaves or less.
MIDI
: LED indicator lights up when ELECTRIC PIANO is turned on. The LED will flash off
briefly when the ELECTRIC PIANO receives MIDI transmissions from a MIDI controller.
PRESET
: rotary preset selector. Allows selection of any one of the first 22 presets as
indicated by the positions marked 1 - 22. The position marked
M
selects multi-timbral mode
(see page 10). The position marked
P
allows the ELECTRIC PIANO to accept program
changes from a MIDI controller.
There are a total of 32 presets in the ELECTRIC PIANO. The first 22 can be selected through the
PRESET selector. All presets (the front panel 22 and the last 10) can be selected via program
changes from a MIDI controller.
REAR PANEL
POWER SWITCH
: push-on / push-off switch
POWER JACK
: The AC wall adapter connects to the ELECTRIC PIANO via this jack.
TUNING
: rotary tuning control. Center detent is set to A440 standard tuning.
MIDI CH
: 16 position rotary switch. Selects basic MIDI channel (channel 1 - 15 only) by
setting the switch to positions 1 - 15. MIDI OMNI ON mode is selected by setting the switch
to position 0.
FOOT PEDAL
: 1/4" stereo type (tip, ring, sleeve) phone jack provided for foot pedal control
of the Wah-wah effect. A potentiometer type pedal or control voltage pedal may be used.
MIDI THRU
: 5-pin DIN MIDI thru output. This MIDI output may be used to send a "carbon
copy" of the MIDI IN data to other modules.
MIDI IN
: 5-pin DIN MIDI input. This MIDI input accepts MIDI data from a MIDI controller (i.e.
keyboard) or computer
CH1
: channel 1 audio output.
CH2/PHONE
: channel 2 audio output. Can also be used to drive high impedance stereo
headphones (> 600 ohm).
SET-UP
