© Vocas Systems B.V.
5
Changing the connection cable
Compatibility with all lens manufacturers is available by
changing the connection cable. As this connection cable can
only be connected in one way this is straightforward.
Put the female connector of the connection cable
in the front of the Z
i
F-
100 until you hear a little “click”.
Confirm that the cable is correctly mounted by giving
it a gentle pull.
If a Y-cable is required, this Y-cable should be connected at the lens-side of the
standard cable.
Releasing the connection cable is done by
aligning the mount of the Z
i
F-100.
Rotate the mount until you see two small
holes on either side of the mount. Push a
little screwdriver in both these holes until
they touch the connector inside and make a
movement forwards (as shown in the
picture).
