VOCARE vitals360, User Manual

Page: 27 / 117

Instructions for Use Page 27 of 117
Test and Share Mode
TAP & SELECT ”Test and Share” button on the screen and you will go to the home page of Test and
Share Mode.
This mode mimics standard medical devices, similar to Single Test Mode, with additional capability of sending
data outside of the device. In Test and Share Mode
the device must not only measure, but also store vital sign
measurements. The stored measurements must be associated with a patient. A device may be purchased
by a Patient and remain permanently in the Patient’s possession. However, it is also possible that a Patient is
given a device by a Healthcare Provider for a set period of time, after which the Patient must return the device
for thorough cleaning before further use. The Healthcare Provider is then able to switch the cleaned device into
another operating mode.
1. The device obtains a list of patients the Healthcare Provider is authorized to view from the third-party
MDDS and displays the patients in a list, with the options to select, search, view patient details and
register a new patient.
2. The Healthcare Provider selects a patient from the list.
3. The device stores the selected patient identifier and displays the main menu from where the
Healthcare Provider or patient may select measurements to perform.
4. The device will require the Healthcare Provider or patient to authenticate in order to enter or exit Test
and Share Mode.
NOTES
a. In order to give access to patient data, the device must establish that the user is a Healthcare
Provider or patient. In order to give access only to the patients of the Healthcare Provider, the
device must establish the Healthcare Provider’s identity.
5. The device will allow the Healthcare Provider or patient to enter or exit Test and Share Mode even if no
network connection is available.
NOTES
a. While at the clinic, the Healthcare Provider or patient uses the device in Test and Share Mode.
The Healthcare Provider or patient might leave the clinic to an area without network
connection, yet forgets to switch to Single Test Mode before leaving. It will be possible for the
Healthcare Provider or patient to exit Test and Share Mode and enter Single Test Mode once
the Healthcare Provider or patient arrives at their destination.
6. When the Healthcare Provider or patient exits Test and Share Mode, the device shall clear all patient
and measurement data stored on the device.
7. If there is no network connection available and there is measurement data stored on the device, then