3.3
Check if all communication tubes are connected correctly.
See picture below: the two quick-release couplings marked with a green dot
should be connected by a communication tube (Ø4mm); the same should be
done for the two couplings marked with a blue dot.
3.4
C
u
t
o
p
e
n
m
a
i
n
w
a
t
e
r supply in order to install direct connections to the evo-water Softener or to
install the evo-water Bypass (recommended). Follow the arrows on both Bypass
and softener for water inlet and outlet.
Pay attention that the inlet filter doesn’t fall out.
3.4.1
with evo-water bypass
with direct connections
The evo-water Bypass has a ¾” connection. The direct connections on the
water softener are available in ½”, ¾” and 1”.
