VNS G-202 Operation Manual Download Page 20

G-202 User Manual V 1.03                                                                                                      Document: G-202102 

------------------------------------------------------------------------------------------------------------------------------------------------ 

20 

 

High quality video and graphics scaling up and scaling down   

Yes   

Color adjustment (RGB color adjustment, Hue, saturation, 

sharpness, contrast, brightness, preset color modes)   

Yes   

System control   

Full function Front Panel Keypads & IR Remote controller   

Yes   

Cabled IR Receiver Extender (up to 20 meters) 

Option   

Box ID for easy independent control through IR, RS-232 or 

Ethernet.   

Yes   

Embedded RS-232 with DB-9 connector   

Yes   

ASCII control protocol over RS-232 

Yes   

Easy Use   

Firmware update via RS-232 connector   

Yes 

5 selectable Profile settings for difference display modes   

Yes   

NO PC required   

Yes   

Ear mount bracket in 1U rack   

Option   

Dimension & weight 

Only Box body, not including remote controller, power supply 

and packing   

225x155x36mm, 0.7kg   

 

 

 

Summary of Contents for G-202






















Reviews: