G-202 User Manual V 1.03 Document: G-202102
------------------------------------------------------------------------------------------------------------------------------------------------
17
10.5.2 [Box ID]
10.5.3 [Profile Setting]
10.5.4 [Network]
11 Two projector image stacking procedures
11.1 Image stacking is a cost effective solution to increase the brightness of the projection system. User
can use two low cost projector with 4,000 lumen to stack up to 8,000 lumens easily at fraction of cost.
11.2 In image stacking application, user needs to use digital input signal (HDMI or DVI-D) as input source
and the projectors shall be able to support DVI-D or HDMI input signal. If connecting with analog
Audio Mute:
[Mute Off] will enable audio output.
[Mute On] will disable audio output.
[Mute] hot key in remote controller is
available
[Box ID] is the identification No of each
GeoBox
GeoBox ID No is from 1-99
After set Box ID, user can control GeoBox
via IR Remote controller or RS232
Please see details in [Helpful Tips]
Remote controller can only control GeoBox
ID# from 1-9.
[Profile] is to save and load GeoBox settings
including input port, output resolution and all
the settings in GeoBox.
Five indexes can be chosen to save GeoBox
settings in each GeoBox and can be recalled
by IR remote controller or RS232
RS232 interface is designed with DB-9
connector for the communication
between GeoBox and Host computer.
Detailed RS-232 protocol can be
provided as needed.
