background image

vShield Administration Guide

36

VMware, Inc.

 

6

Click 

Confirm Install 

to confirm update installation.

There are two tables on this screen. During installation, you can view the top table for the description, start 
time, success state, and process state of the current update. View the bottom table for the update status of 
each vShield App. All vShield App instances have been upgraded when the status of the last vShield App 
is displayed as 

Finished

.

7

After the vShield Manager reboots, click the 

Update Status

 tab.

8

Click 

Reboot Manager

 if prompted.

9

Click 

Finish Install

 to complete the system update.

10 Click 

Confirm

.

Review the Update History

The

 Update History

 tab lists the updates that have already been installed, including the installation date and 

a brief description of each update.

To view a history of installed updates

1

Click 

Settings & Reports

 from the vShield Manager inventory panel.

2

Click  the 

Updates

 tab.

3

Click 

Update History

Summary of Contents for VSHIELD APP 1.0.0 UPDATE 1 - API

















































































































































Reviews: