Vmetro VBAT-PB, User Manual, Page: 110 / 186

6 Commands reference
- Extract Mode
A particular pattern may be "extracted", so that only samples satisfying the
search pattern are displayed on the screen. This is done by executing
' „aearch/Ext r a c t M o d e ' when the Search window is open (after a
pattern is edited by the ' Z e a r c h / E i n d ' command. Then simply type the
accelerator keys ' S ' and ' E ' ).
When Extract is "on", this is indicated by an asterisk in the pull down menu.
Extract can be turned off by executing the command s.aearch/Ext ract
Mode' again ( S ' and ' E ' ).
- Close Search Window
The sub-command ' Close S e a r c h Window' will cause the search
window to disappear from the Trace Display screen. This is useful when search
operations are no longer needed. When this is done, it is no longer possible to
repeat the last search by <F3>.
Jump
The ' Jump' command moves the cursor to a given
line number in the trace, to the first or last line or to
the trigger line. This gives quick and convenient
navigation in the trace buffer.
.1o=P
C o u n t F o r n
F i r s t L i n e
L a s t L i n e
T r i g g e r L i n e
L i n e N u m b e r
- First Line
Jumps to the first line in the trace buffer that contains a valid sample.
- Last Line
Jumps to the last line in the trace buffer that contains a valid sample.
- Trigger Line
Jumps to the line in the trace buffer that contains the trigger sample (line
number 0).
- Line number
Jumps to a given line number in the trace buffer. A dialog box is given where
the user enters a line number.
VMETRO V B T - 3 2 5 User's Manual 9 5