Vanguard PCI Installation Guide
4
Before You Begin
Before You Begin
Inspection
Make sure that the Vanguard you have received is according to your
purchase order with respect to model.
The Vanguard package consists of the following:
•
Installation Guide (this document).
•
Busview
®
CD-ROM with License Key (Authorization Code).
•
The Vanguard PCI assembly inside an anti-static bag.
•
A Trigger Output cable with BNC Coax connector (4945-K-24).
•
8 patch leads of various colors for pin header I/O and 4
micrograbber test clips (401-VG-TL).
•
External Temperature Probe (401-VG-ETS).
•
USB cable (401-VG-USB).
•
Ethernet Cable (401-VG-ETH).Adapter to connect a 3.3 V PCI
board to a legacy 5 V (33MHz) only slot including a replacement
front panel, and a bracket with two plastic screws.
Warning
!
Check that the SAM and optional Exerciser
are properly seated. Ensure that the power cable is
disconnected.
It is
not
enough to turn off the power
switch on the system. If the system has power
management, there is still power on a few of the pins in the
system. This can potentially damage the board and/or the system.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
