Vanguard PCI Installation Guide
14
Connecting to the Vanguard
Connecting via USB Cable
1.
Connect a USB cable from the USB port on the front panel of
your Vanguard to a free USB port on your PC.
2.
Once connected, let the “New Hardware Wizard” install the
necessary drivers automatically.
If the New Hardware Wizard does not start, you can start it
manually as follows:
Windows 2000 -
Click Start, Settings, and Control Panel and
double-click Add/Remove Hardware. In the Add/Remove
Hardware dialog box, click Next. Then choose “Add/
Troubleshoot a device” and click Next again.
Windows XP -
Click Start, Control Panel, Add Hardware. In the
Found New Hardware Wizard dialog box, click Next.
Windows Vista -
Click Start, Control Panel, select ‘System &
Maintenance’, select ‘Device Manager’. In Device Manager,
select Action then Scan for Hardware.
3.
The operating system may ask you to confirm the driver because
it has not been digitally signed by Microsoft. Choose accept.
If a driver cannot be found, refer to “Troubleshooting” on page 16.
Once the driver is installed, BusView is ready to communicate with
your Vanguard.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
