Vanguard PCI Installation Guide
13
Connecting to the Vanguard
Connecting to the Vanguard
BusView can communicate with the Vanguard using an Ethernet or a
USB (Universal Serial Bus) connection.
Before starting Busview do the following:
Connecting via Ethernet
•
DHCP:
If your network includes a DHCP server, then the
Vanguard is listed in the Device Information window after
BusView is started.
•
STATIC IP:
If the Vanguard is not listed, or if your network does
not use a DHCP server, see “Getting Started with BusView
®
” in
the Vanguard User Guide for instructions on how to configure
your Vanguard with a static IP address.
If your Vanguard model has a display, it will show the IP address of
the Vanguard once connected via a network.
Note –
A Crossover Ethernet cable (not supplied) is required if you
are connecting to the Vanguard Ethernet port directly from your
PC.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
