VMAC
–
Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289
Fax: 1-250-740-3201
23
Align to approximately
the 8 o’clock position
Figure 4.2
□
Push the insulated tube clips toward the tank to provide
clearance for the mounting cables.
4.2 Installing the Tank Assembly
□
Remove the three clips holding the wire harness on the outside
of the driver’s side frame rail.
□
Remove the front park brake cable guide from the frame and
leave it attached to the cable.
□
Remove the brake line from the clips locating it to the top inside
of driver frame rail and remove the clips. Bend the brake line
slightly inward away from the frame to provide clearance for the
rear tank mount
□
Insert the threaded ends of the cable straps through the end hole
on each of the bar straps.
