VMAC
–
Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289
Fax: 1-250-740-3201
27
Part 5: Installing the Main Bracket
and Compressor
5.1 Installing the Cooler
□
Remove and discard the coolant fill hose plastic alignment clips
from the OEM bottom radiator hose.
□
Cut and discard 8-1/2 inches of straight hose from the lowest
section of the radiator hose.
□
Connect the cooler spigots to the cut ends of the lower radiator
hose so that the cooler is between the radiator and engine with
the oil connection fittings toward the engine (Figure 5.1). Tighten
the hose clamps.
1/2” hose from tank
1/2” hose
to compressor
Hos
e to
eng
ine
H
o
s
e
t
o
r
a
d
ia
to
r
Skid plate
Cut 8-1/2” from
the center of
the OEM hose
Figure 5.1
□
Route the 1/2 inch hose from the tank outside the body mount to
the cooler and connect it to the driver’s side fitting.
