VMAC
–
Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289
Fax: 1-250-740-3201
19
Red
Green
Black
White
To “C”
To “F”
Figure 3.2
3.2.2 V900103 Power Connection (prior to 2008)
□
At the fuse panel, locate fuse 42.
□
Install the fuse tap on the fuse and install the fuse so that the tap
is on the high (hot) side, not on the low (fused) side. With the
fuse removed, this should read 12 Volts with the ignition switch
in the ON position.
3.2.3 Power Connection 2008-2010 models
□
Locate the electrical box on the firewall between the park brake
and the steering column.
□
Test the connections in the center of the electrical box to locate a
source that provides 12 Volts with the ignition switch in the ON
position.
3.3 Connecting the Under-hood Wiring
Cover all underhood wiring with plastic loom. Secure the
harnesses with nylon ties and pull all excess wire back
into the cab.
□
Route the two grey wires and the white wire with the plug
connector to the compressor. Connect the wires to the matching
connectors at the compressor.
!
