VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
55
Vacuum assist power brakes only*:
☐
*Reroute the vacuum hose, that runs between the brake booster and the
power steering reservoir, behind the compressor and in front of the brake
fluid reservoir.
☐
*Using a cable tie, secure the vacuum hose to the oil fill tube.
☐
*Rotate the vacuum tube and reconnect the vacuum hose to the vacuum
assembly (Figure 78).
Figure 78 — Position foam abrasion sleeve
Foam abrasion
sleeve
Figure 79 — Installing the windshield washer bottle bracket
☐
*Slide the foam abrasion sleeve on the vacuum hose up until it is in front of
the brake fluid reservoir (Figure 78).
☐
Using the OEM fastener, install the supplied windshield washer bottle bracket
(Figure 79).
Reconnect
vacuum hose
