VMAC
–
Vehicle Mounted Air Compressors
Toll Free:
1-800-738-8622
Local: 1-250-740-3200
Fax: 1-250-740-3201
6
Make sure the new filter is a VMAC filter, part # 3600079. This is a high-pressure filter. Use of other filters not
rated to the required pressure may cause the filter to rupture.
Apply a thin coating of compressor oil to the coalescing filter sealing gasket and coat the end of the threaded nipple, as
there is also an O-ring inside the coalescing filter.
Spin the filter onto the threaded nipple until the gasket contacts the sealing surface of the manifold block.
Tighten the filter an additional 3/4 to 1 turn to seat the sealing gasket.
Never over-tighten the filter, as this may damage the seal or filter.
Check the oil level following the oil level checking procedure in
Section 1.
Document #1900924
Version
Revision Details
Revised by/date
Approved by/date
Implemented
A
Engineering Release
SAR 22 Sep 2011
SM/MH 5 Oct 2011
6 Oct 2011
B
ECN 12-028: revised as per markups
SAR 26 Jan 2012
SM 25 Jun 2012
04 Jul 2012
C
ECN 13-048: Updated for use on both
A500001 and A500017
CM 10 Jun 2013
MH/DB 04 Jul 2013
05 Jul 2013
Copyright 2011
All trademarks used in this manual are the property of the respective copyright holder. The contents of this manual may not be reproduced in any form without the
express written permission of VMAC, 1333 Kipp Road, Nanaimo, BC V9X 1R3. Printed in Canada
