Vlano JMARVC604, Instructions Of Use

Page: 19 / 28

18
USE
Sensitive touches
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your
finger touches the key, the corresponding command is activated. This activation is validated by
a control light, a letter or a number in the display and/or a “beep” sound.
Touch only one key on the same time.
Display
Display Designation Function
0 Zero The heating zone is activated
1…9
Power level Selection of the cooking level
A Heat accelerator Automatic cooking
E Error message Electronic failure
H Residual heat The heating zone is hot
L Locking Control panel locking.
STARTING UP THE APPLIANCE
Before using your new hob
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Starting-up

Start-up/ switch off the hob
Action Control panel Display
To start Press key [ ] [ 0 ]
To stop Press key [ ] nothing or [ H ]

Start-up/ switch off a heating zone
Action Control panel Display
Increase power Press key [ + ] [ 1 ] to [ 9 ]
Decrease power Press key [ - ] [ 9 ] to [ 1 ]
Stop Press simultaneous [ + ] and [ - ] [ 0 ] or [ H ]
Residual heat indication
After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light i
s on,don’t touch the heating zone and don’t put any heat
sensitive object on them. There are risks of burn and fire.