Operation Manual
Eccellenza Pod
23
Press & Hold (Hot Water)
Hot water can be programmed to be dispensed in one of two ways – by the cup, or on demand. With this
feature set to OFF, when hot water is selected and the Start button is pressed, enough hot water will be
dispensed to completely fill the user’s cup. However, if this feature is switched to ON, hot water will only be
dispensed as long as the hot water button is kept pressed (to maximum of 10 seconds per press). Releasing
the button stops the flow of hot water.
To set the Press & hold hot water feature,
1. Enter the Set-Up mode and scroll to the
Options
menu.
2. Press the
Enter (
)
button.
3. Scroll to the
Press & Hold
menu.
4. Press the
Enter (
)
button.
5. Scroll UP to the setting required and then press the
Enter (
)
button to save the changes.
Heating Message
This option tells the machine to display the
heating message
if the water in the tank is not up to proper
brewing temperature. This menu allows you to set the way this message is displayed, or to switch it off
completely.
To set the Reminder Messages,
1. Enter the Set-Up mode and scroll to the
Options
menu.
2. Press the
Enter (
)
button.
3. Scroll to the
Heating Msg.
menu.
4. Press the
Enter (
)
button.
5. Scroll to the required setting. Select one of the following options for the message:
ON
–
The reminder message is displayed and the unit functions in a limited capacity (or not at
all) until the message is cleared.
OFF
–
No message will appear.
Passive
–
The reminder message is displayed, but the machine continues to function normally.
6. Once selected, press the
Enter (
)
button to save the changes.
