VKI Technologies Eccellenza Momentum Operation Manual Download Page 116

Page: 116 / 120

ecti

–

Ins

talling th

e Car

Reader O

ion

Operation Manual

VKI Publication #202377-001

116

13.

Enable the “

Card Reader

” option in the Momentum programming.

Enter the “

Programming

” Mode (see page 23).

Select the “

Vending

” Menu (see page 47).

In the “

General

” tab, enable ‘

Vending Mode

’ and enable ‘

Cashless

’ (the sliders

for both must be

green

The card reader will now be functional, assuming you have subscribed to, and activated the

service with the card reader provider.

Please note that VKI Technologies does not offer the card reader hardware, nor do we provide

the card reader service. You will need to contact one of the approved card reader suppliers

(Coinco, Nayax, USA Technologies, SEM) for more details.

Summary of Contents for Eccellenza Momentum

























































































































Search results

Summary of Contents for Eccellenza Momentum

Reviews:

Related manuals for Eccellenza Momentum

Brands by name

Popular brands

VKI Technologies Eccellenza Momentum, Operation Manual

Search results

Summary of Contents for Eccellenza Momentum

Reviews:

Related manuals for Eccellenza Momentum

Brands by name

Popular brands