158
159
OTHER FUNCTIONS
PUK2 code
The PUK2 code, supplied with some SIM cards, is required to change a blocked PIN2 code. If you key in an
incorrect PUK2 code ten times in succession, you cannot use the functions requiring the PIN2 code. Contact
your service provider for a new card. You cannot change the PUK2 code. If you lose the code, contact your
service provider.
Barring Password
The 4-digit barring password is required when you use the Call Barring function. You can obtain the password
from your service provider when you subscribe to this function.
Using the Batteries
The battery provided with the phone is a Lithium slim battery.
Precautions When Using Batteries
Never use any charger or battery that is damaged in any way.
Use the battery only for its intended purpose.
If you use the phone near the network base station, it uses less power ; talk and standby times are greatly
affected by the signal strength on the cellular network and the parameters set by the network operator.
Battery charging times depend on the remaining battery charge, the type of battery, and charger used.
The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new
battery.
If left unused, a fully charged battery will discharge itself over time.
