8
Connecting External Devices
USING THE AUXILIARY INPUT JACK
Each A-1250 monitor has a 3.5mm auxiliary input jack labeled AUX located
on the bottom left of the screen. To connect an external source (video
game system, camcorder, etc.) to the monitor, use the available 3.5mm to
RCA auxiliary input adapter cable (to connect an iPod
®
use the available
3.5mm to iPod interface cable). Using either the remote or the monitor-
control buttons, press the SOURCE button until AUX has been selected.
The auxiliary device can now be viewed.
NOTE: Any source connected via the screen-mounted AUX jack can only
be viewed on the screen that the auxiliary source is physically connected
to.
USING THE WIRED HEADPHONE JACK
Each A-1250 monitor has a 3.5mm wired headphone jack labeled
.
To use, simply connect a pair of wired headphones (not included) to the
wired headphone jack and use the
‘
5
’
or
‘
6
’
monitor control buttons to
adjust the headphone volume output
.
NOTE: Using the monitor control buttons to change the wired headphone
volume output will not affect the volume output of the wireless IR
headphones.
USING THE A/V CONTROL MODULE AUXILIARY INPUT
The A-1250 system features auxiliary component RCA input jacks on the
A/V Control Module. Devices connected to this input can be viewed on
either screen (independently or simultaneously), as well as output through
the vehicle stereo via the A-1250’s FM Transmitter. To view this input press
the SOURCE button until EXT. AUX is displayed.
NOTE: Consult your installer to determine how to access this input.
Summary of Contents for A 1250
Page 2: ......
Page 24: ...23 Notes...
