Special notes on operation with Commutator BKM-440M
C 1 C 2
C 3
C 1 C 2
Image capture
To capture visitor’s image during intercom
To set the Monitor on automatic image capture
Note.
Viewing captured images
-01
-02
Note.
SPECIFICATIONS
Ohms
W max
mm
OPERATING CONDITIONS
+
+
(see Fig. )
Both Monitors connected through BKM
are not classified as main and additional devices (unlike with BKM-4
and
they remain fully equivalent in operation features.
To view door zone in front of the doorstations connected to
,
channels, and doorstation BVD-403CPO connected
to
channel of BKM-440M (see Fig. 8), push repeatedly the
button on either Monitor. The screen is displaying images
from the connected doorstations one by one. If one of the video inputs is vacant, i.e. not connected to any video device, it is
from viewing. Video monitoring is available from the both Monitors simultaneously.
If you are pushing the
button with the
, the screen is showing images from all cameras one by one,
though a vacant video channel is
from viewing, showing a black screen.
To activate the doorstations connected to
,
channels, push the
button on one of the Monitors until the screen is
displaying image you need, then pick up the handset.
When the handset is picked up from one of the Monitors, the other one gets blocked. It means that with picking up the
handset the Monitor’s screen will remain switched off, and short beeps will be sounding indicating the busy line.
When the handset is picked up from either Monitor, additional apartment handset will be disengaged.
, push the
button on your Monitor, when image from the camera is on the
screen.
, push the
button, when the Monitor is on stand-by. The LED indicator
for AWAY mode is illuminating. The Monitor captures image in 3 seconds after the call starts. The LED indicator is blinking,
if there are new images in the Monitor’s memory.
To quit automatic image capture mode, push the
button, when the Monitor is on stand-by. The LED indicator for AWAY
mode will go out.
The Monitor’s memory is capable to store 64 images. If the memory is full, a new image will replace the oldest one in
the archive.
To start viewing captured images, push either
or
. The screen switches on and shows the newest captured image. In
the lower part of the screen there are time, date and number of the image displayed. The newest image has number
.
The previous image has number
, and so on.
Push either
or
to view the previous or next image respectively.
To quit viewing push
.
The Monitor automatically quits viewing:
- in 40 seconds, if you do not push any button;
- when being called from the doorstation.
Captured images are always B/W disregarding the type of camera (either B/W or colour).
Screen
Video input
impedance
Power consumption
Dimensions (W)x(H)x(D)
The Monitor is intended for indoor use only.
Ambient temperature range
to
Relative humidity of air:
up to
at
8
-440М
40),
:
:
-
:
Н
Н
Н
Н
Н
5°C
40°C
93%
25°C
automatically skipped
picked up handset
not skipped
-
Colour system
voltage
Operating voltage
Weight
3 "
mm
V p-p
VDC
.
kg
.5
(89
) TFT LCD
PAL
470
1…1.8
15…27
3
140х183х48
0 6
www.
2016-02)
/1
vizit-group.com VIZIT-M441M Operating Instruction (revision
11 1