VIZIO VW37L HDTV20A User Manual
Version 11/19/2007
11
www.VIZIO.com
1.4
1.4
1.4
1.4
VIZIO Remote Control
VIZIO Remote Control
VIZIO Remote Control
VIZIO Remote Control
GUIDE
– This button displays program information. Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic Programming Guide will
appear in the screen.
POWER
– Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
TV
– Press this button to select TV.
AV
– Press this button to select the Audio Video input. Pressing this button
repeatedly will get you to the AV input. Keep in mind that if S-Video cable is
being used, then AV will show the signal going through this input as the S-
video takes priority.
COMPONENT
– Press this button to select the Component (YPbPr) input.
Pressing this button repeatedly will take you through the Component
(Component 1 and component 2) inputs.
HDMI
– Press this button to select the HDMI input. Pressing this button
repeatedly will get you through the HDMI (HDMI1, and HDMI 2) different
inputs
MENU
– Use this button for the On-Screen Display (OSD) menus. When use
within the OSD menus, pressing this key will make the selection of an option.
- These buttons navigate the On-Screen Display (OSD).
MUTE
– This button turns the sound on and off.
LAST
– This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL (+ or -)
– These buttons turn the volume up or down.
CH (+ or -)
– These buttons change the channels up or down.
Number Button Pad
– Use these buttons to
select a channel or enter a password.
INPUT
– This button allows the user to cycle
through the inputs. Repeatedly pressing of this
button will step you through the input sources in
the following sequence: TV, AV (S-Video),
Component1, Component2, RGB, HDMI1 and
HDMI2. Once you have stepped through the
entire sequence, you will return to the beginning.
- (DASH)
– When selecting a digital channel
directly, use this button for the separation of
main and sub-channels. For example, channel
28-2 would be selected by the button sequence
2 8
--
2.
