background image

ENG - 39

What This Warranty Does Not Cover

This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; 

(e) signal issues; (f) damage from shipping; (g) acts of God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs

attempted by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed serial numbers; (k) products 

requiring routine maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.

Exclusions and Limitations

If you are a consumer and VIZIO fails to comply with these terms, to the extent permitted by law, VIZIO may be responsible for loss or damage 

you suffer that is a foreseeable result of VIZIO breaking the terms of this warranty or its failing to use reasonable care and skill, but VIZIO is not 

responsible for any loss or damage that is not foreseeable.

If you are a business, to the greatest extent permitted by applicable law, any and all implied warranties, conditions or other terms including of 

merchantability, satisfactory quality and fitness for purpose are excluded.  In addition, VIZIO will not be responsible for any loss of use, loss of 

information or data, commercial loss, lost revenue or lost profits or indirect, special, incidental or consequential damages even if VIZIO has been 

advised of the possibility of such damages.

Some countries, states, or provinces do not allow the exclusion of implied warranties or the limitation of incidental or consequential damages so the 

above limitations and exclusions may be limited in their approach to you. When implied warranties may not be excluded in their entirety, they will 

be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights; you may have other rights that may vary 

depending on local law. Your statutory rights are not affected.

General

No employee or agent of VIZIO may modify this warranty. If any term of this warranty is found to be unenforceable, that term will be severed from 

this warranty and all other terms will remain in effect. This warranty applies to the maximum extent not prohibited by law.

Summary of Contents for SB36512-F6E











































Reviews: