manualshive.com logo in svg

Vizio SB36512-F6E, Quick Start Manual, Page: 25 / 42

Share
Download
Vizio SB36512-F6E Quick Start Manual Download Page 25

ENG - 25

Function

LED Behavior

Description

Factory 

Reset

Reset the sound bar to the factory default settings. To perform a Factory 

Reset, 

Press and Hold the Bluetooth(   ) and Volume Down (—) buttons for 

5 seconds. 

Note: This will erase all settings and preferences that you have set.

VIZIO TV 

Remote 

Control

Enable/disable the use of a VIZIO TV remote control to power on and 

adjust the volume of the sound bar. To enable/disable this function, 

Press and Hold the Power (   ) and Volume Up ( + ) buttons for 5 seconds.

EcoPower

When the EcoPower setting is enabled, the sound bar will automatically 

power down after a period of inactivity as a power saving feature. When 

disabled, the sound bar will remain powered on until you turn it off. To 

enable/disable this function, 

Press and Hold the Power (   ) and Volume 

Down (—) buttons for 5 seconds.

Note: The EcoPower setting is enabled by default.

PROGRAMMING THE SOUND BAR

You can program your sound bar to accept TV remote IR commands. Press the Menu button on the remote, then use 

the Up/Down buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn 

Vol +, and Learn Mute.

Function

LED Behavior

Description

Learn Volume 

Down

Press the 

Play button to put the sound bar into learning mode. While the sound bar is in 

learning mode, press the 

Volume Down button on the TV remote 

control. All of the LED Indicators on the sound bar will fl ash two times indicating that it 

has successfully recognized the TV remote.

Learn Volume Up

Press the 

Play button to put the sound bar into learning mode. While the sound bar is in 

learning mode, press the 

Volume Up button on the TV remote control. All of the LED Indica-

tors on the sound bar will fl ash two times indicating that it has successfully recognized the TV 

remote.

Learn Mute

Press the 

Play button to put the sound bar into learning mode. While the sound bar is in 

learning mode, press the 

Mute button on the TV remote control. All of the LED Indicators 

on the sound bar will fl ash two times indicating that it has 

successfully recognized the TV remote.

 Learn          Vol+

Learn        Mute

 Learn          Vol-

(Waiting to learn)

Flash from bottom 

to top and back 

continuously.

All of the LEDs 

will blink twice to 

confi rm.

Turn off  your TV speakers when 

programming your sound bar.

Point both the sound bar and TV 

remotes towards the front of the 

sound bar when programming.

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

Front

Top

Back

Side

Angle

Summary of Contents for SB36512-F6E











































Reviews:

No comments