ENG - 10
Turn on your TV and sound bar. The sound bar will automatically
begin searching for an active input.*
The LED indicators on the front of the sound bar will begin cycling in
triplets through inputs until an audio source is detected.**
You can press the
INPUT button to switch between audio sources.
For example, if you connected your TV to AUX , set the sound bar
to AUX .
TruVolume
Press to enable/disable
TruVolume.
3
Remove the battery cover by gently
sliding it away from the remote.
4
Insert the included batteries and gently
slide the battery cover back into place.
5
Top
Top
Tip:
Pressing the
INPUT button will stop the auto
detect function.
*Occurs only during fi rst-time set up.
**Auto detect function only occurs once when the sound bar is fi rst powered on. To enable this feature again, you must
do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT
button for 3 seconds.
When needed, VIZIO recommends replacing the batteries that came
with this remote with two, new Duracell ‘AAA’ alkaline batteries.
Input
Power
