Vivotek VC8101 User Manual Download Page 55

Page: 55 / 213

VIVOTEK

User's Manual - 55

Exposure

On this page, you can configure the Exposure measurement window, Exposure level, Exposure mode,

Exposure time, Gain control, and Day/Night mode settings.

Measurement Window: This function allows users to set measurement window(s) for low light

compensation. For example, where low-light objects are posed against an extremely bright background.

You may want to exclude the bright sunlight shining through a building's corridor.

■ Full view: Calculate the full range of view and offer appropriate

light compensation.

■ Custom: This option allows you to manually add customized windows as inclusive or exclusive regions.

A total of 10 windows can be configured. Please refer to the next page for detailed illustration.

Summary of Contents for VC8101






















































































































































































































Search results

Summary of Contents for VC8101

Reviews:

Brands by name

Popular brands

Vivotek VC8101, User Manual

Search results

Summary of Contents for VC8101

Reviews:

Brands by name

Popular brands