VIVOTEK
322 - User's Manual
8.29 Camera Control
(capability_camctrl_c<0~(n-1)>_zoommodule = 1)
Note:
This request requires Viewer privileges.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/camctrl/camctrl.cgi?[channel=<value>][&camid=<value>]
[&move=<value>] – Move home, up, down, left, right
[&focus=<value>]
– Focus operation
[&auto=<value>] – Auto pan, patrol
[&zoom=<value>]
– Zoom in, out
[&zooming=<value>&zs=<value>] – Zoom without stopping, used for joystick
[&vx=<value>&vy=<value>&vs=<value>] – Shift without stopping, used for joystick
[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>]
– Click on image
(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>][&speedapp=
<
value
>
][&speedlink=<val
ue>] ]
– Set speeds
[&return=<return page>]
Example:
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&move=right
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&zoom=tele
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&x=300&y=200&resolution=704x480&videosi
ze=704x480&strech=1
PARAMETER
VALUE
DESCRIPTION
channel
<0~(n-1)>
Channel of video source.
camid
0,<positive integer>
Camera ID.
move
home
Move to camera to home position.
up
Move camera up.
down
Move camera down.
left
Move camera left.
right
Move camera right.
speedpan
-5 ~ 5
Set the pan speed.
speedtilt
-5 ~ 5
Set the tilt speed.
