75
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Telnet
Network Camera has a Telnet daemon for administrators to access some seldom used
functions. Using any general terminal program to connect to Network Camera will prompt
the user for a password. Username is not requested here since only administrators can
access the Telnet daemon. The password is as same as that used for web access. After
logging in, type "help" for the command list. If "debug" or "dinote" is not executed, Telnet
will disconnect automatically after being idle for 1 minute.
System core debugging
General activities are recorded into SYSTEM.LOG continuously, but information about
abnormal status is not. To look deep into the core debugging information, administrators
may type the “debug” command. This will cause Network Camera to start dumping the
detailed debugging information while the system is running. This is useful to examine if any
error has occurred when the system operates abnormally. The stored information will be
cleared automatically after the dump. Network Camera will continue to dump new
messages unless the connection is broken. If Telnet is not connected, any messages will be
stored until administrators re-login.
Monitor changed status of digital inputs
Typing "dinote" will make Network Camera send the current status of digital input. After
that Network Camera will continuously monitor DI status and send messages only when
the state has changed. For example, after typing "dinote" the terminal will display
DI=L
DI=L
and if DI changes to H, terminal will display only
DI=H
Stop information dumping
Typing "stop" will cease dumping debug information and digital input status.
Summary of Contents for NetworKam IP3111
Page 1: ......
