38
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
System parameters
To change the system name, type in the text box after "
Host Name
". This name will be
displayed at the top of the main page. In the case that only the host name is changed,
without adjusting date and time of Network Camera, click on "
Keep current date and
time
".
“
Automatically restore DO state after seconds”
allows you to restore DO state after
events trigger DO.
There are three ways to adjust system date and time. The easiest is to make Network
Camera "
sync with computer time
". The second is to set the date and time manually.
Notice the format in the related field while typing. The third is to make Network Camera
automatically synchronize with timeservers over the Internet whenever Network Camera
starts up. It may fail if the assigned NTP server cannot be reached or it is within a local
network. Leaving the NTP server blank will let Network Camera connect to default
timeservers. If some specific timeserver is assigned, type it in the text box. Domain name
or IP address format is acceptable as long as DNS server is available. Do not forget to set
Summary of Contents for NetworKam IP3111
Page 1: ......
