36
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
packet loss isn’t occurred and decoder will run normally. But the real-time issue is worse
than UDP protocol. If your environment is behind the firewall and it opens HTTP port (80)
only, you can select HTTP protocol only. In this mode, audio will not be sent and you just
can see the video only. If you don’t know which protocol you should choose, select the UDP
protocol and the client will try these protocols in this order, UDP
→
TCP
→
HTTP. After the
client connects to the Network Camera successfully, “
Protocol Option
” will be set as the
working protocol automatically.
<url>
http://<Network Camera>/client.html
<Network Camera> is the domain name or original IP address of Network Camera.
When using modem as the network connection, Network Camera will not send the
audio automatically, and send video only because the low bandwidth environment doesn’t
meet the requirement for both. In the Client setting page, protocol option will be set as Http
protocol.
Summary of Contents for NetworKam IP3111
Page 1: ......
