Vivotek ND9441 User Manual Download

Page: 51 / 216

VIVOTEK - Built with Reliability

User's Manual - 51

2-2-4. DI/DO

The DI/DO panel provides a glimpse of all DI and DO signal

statuses from the connected cameras. You can manually trigger a

digital output by clicking on its indicators.

When a digital input is triggered, its status will also be indicated on

the panel.

Please note that DO is triggered by one click. You should then

click again to disable the DO. Otherwise, the DO signal will be

continuously triggered. As the result, if the DO is configured as an

alarm trigger, many alarm messages will be generated.

WARNING:

2-2-5. Others

1. Snapshot

: is used to take a snapshot from the camera currently selected. Note that this

function only saves the snapshot (in JPEG) to a USB thumb drive.

The USB thumb drive has to be one that is formatted in FAT format.

2. Manual Recording

: Press the button to start a manual recording from a selected camera.

Click again to stop the recording.

3. Return button

: Click to return to the LiveView window.

IMPPORTANT:

Summary of Contents for ND9441

























































































































































































































Search results

Summary of Contents for ND9441

Reviews:

Related manuals for ND9441

Brands by name

Popular brands

Vivotek ND9441, User Manual

Search results

Summary of Contents for ND9441

Reviews:

Related manuals for ND9441

Brands by name

Popular brands