VIVOTEK
User's Manual - 335
© 2019 VIVOTEK INC. All Right Reserved
208
7.41 Camera PTZ Control (IZ Series)
Group:
camctrl_c<0~(n-1)>
for n channel products
(capability_camctrl_c0_zoommodule = 1 and
capability_camctrl_c0_buildinpt = 0)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
ccdtype
string[16]
6/7
(Internal used, read only)
motortype
string[16]
6/7
(Internal used, read only)
cameraid
0 ~ 255
1/4
Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have to
be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
panspeed
-5 ~ 5
1/4
Pan speed
tiltspeed
-5 ~ 5
1/4
Tilt speed
zoomspeed
-5 ~ 5
1/4
Zoom speed
autospeed
-5 ~ 5
1/4
Auto pan speed
focusspeed
-5 ~ 5
1/4
Auto focus speed
focusmode
auto,onetimeau
to,spotlight,ma
nual
* Available
values are
listed in
"capability_cam
ctrl_c<0~(n-1)>
_focusmode"
1/4
Indicate the focus control mode.
uart
0 ~
"capability_nua
1/4
Select corresponding uart
(capability_nuart>0).
© 2019 VIVOTEK INC. All Right Reserved
209
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
rt"-1
isptz
0 ~ 2
1/4
0: disable PTZ commands.
1: enable PTZ commands with PTZ
driver.
2: enable PTZ commands with UART
tunnel.
* Only available when bit7 of
capability_ptzenabled is 1
preset_i<0~(k-1)>_name string[40]
1/4
Name of the preset location.
preset_i<0~(k-1)>_zoom capability_ptz_
c<0~(n-1)>_min
zoom ~
capability_ptz_
c<0~(n-1)>_ma
xzoom
1/4
Zoom position at each preset location.
preset_i<0~(k-1)>_focus capability_ptz_
c<0~(n-1)>_min
focus ~
capability_ptz_
c<0~(n-1)>_ma
xfocus
1/4
Focus position at each preset location.
preset_i<0~(k-1)>_
dwelling
0 ~ 999
1/4
The dwelling time of each preset
location
preset_i<0~(k-1)>_focus
setting
sync,
fixcurrent
1/4
The focus mode of each preset, which is
essential and should be grouped with
“preset_i<0~(k-1)>_name.”
* We support this parameter when the
version number (httpversion) is equal
or greater than 0305b.
patrolseq
string[120]
1/4
(For external device)
The indexes of patrol points, separated
by “,”
patroldwelling
string[160]
1/4
(For external device)
The dwelling time of each patrol point,
separated by “,”
disablemdonptz
<boolean>
1/4
Disable motion detection on PTZ
Summary of Contents for IB9389-EH
Page 88: ...VIVOTEK 88 User s Manual...
