VIVOTEK
User's Manual - 249
© 2019 VIVOTEK INC. All Right Reserved
122
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
For nvideoin >= 2, the definition is
different:
First all 32 bits are divided into groups
for channel.
Ex:
nvideoin = 2, bit 0~15 are the 1st
group for 1st channel, bit 16~31 are
the 2nd group for 2nd channel.
nvideoin = 3, bit 0~9 are the 1st group
for 1st channel, bit 10~19 are the 2nd
group for 2nd channel, bit 20~31 are
the 3rd group for 3rd channel.
Then, the 1st bit of the group
indicates 1st stream of a channel
support ePTZ or not. The 2nd bit of
the group indicates 2nd stream of a
channel support ePTZ or not, and so
on.
* For most products, the last stream
of a channel will not support ePTZ. It
is reserved for full view of the
channel. For some dual-stream
products, both streams support ePTZ.
nanystream
0, <positive integer>
0/7
number of any media stream per
channel
iva
<boolean>
0/7
Indicate whether to support
Intelligent Video analysis
whitelight
<Not
recommended to
use this>
<boolean>
0/7
Indicate whether to support white
light led.
* We replace this parameter with
"capability_daynight_c<0~(n-1)>_built
inwled" when the version number
(httpversion) is equal or greater than
0309d.
iris
<boolean>
0/7
Indicate whether to support iris
control.
© 2019 VIVOTEK INC. All Right Reserved
123
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
supportsd
<boolean>
0/7
Indicate whether to support local
storage.
fisheye
<boolean>
0/7
The parameter is used to determine
whether the product is fisheye or not.
tampering
<boolean>
0/7
Indicate whether to support
tampering detection.
tamperingmode
tamper,toodark,toobri
ght,tooblurry
0/7
Available tampering mode list.
* Only available when
"capability_tampering" is 1.
adaptiverecording <boolean>
0/7
Indicate whether to support adaptive
recording.
adaptivestreaming <boolean>
0/7
Indicate whether to support adaptive
streaming.
supporttriggertype
s
seq,boot,motion,netw
orkfail,recnotify,tamp
ering,vi,vadp,di,volala
rm,temperature,pir,
visignal,
backup,smartsd,
shockalarm,virestore
<product dependent>
0/7
list all the trigger types which are
supported in the camera:
"seq" = Periodic condition
"boot" = System boot
"motion" = Video motion detection
"networkfail" = network connection
failure
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi" = Virtual input (Manual trigger)
"vadp" = VADP trigger.
"di"= Digital input.
"volalarm" = Audio detection.
"temperature" = Temperature
detection.
"pir" = PIR detection.
"visignal" = Video input signal loss.
"backup" = Backing up recorded files.
"smartsd" = Lifetime detection of SD
card.
"shockalarm" = Shock detection.
"virestore" = Video input signal
restore.
Summary of Contents for IB9389-EH
Page 88: ...VIVOTEK 88 User s Manual...
