VIVOTEK
User's Manual - 13
Network Deployment
Setting up the Network Camera over the Internet
This section explains how to configure the Network Camera to an Internet connection
�
1� If you have external devices such as sensors and alarms, connect them to the general I/
O terminal block�
2� Connect the camera to a switch via Ethernet cable�
3� Connect either the DC 12V or AC 24V power wires from the Network Camera to a power
outlet�
There are several ways to set up the Network Camera over the Internet
�
The first way is
to set up the Network Camera behind a router
�
The second way is to utilize a static IP
�
The
third way is using PPPoE
�
2
3
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
Ethernet Switch
