VIVOTEK
54 - User's Manual
You can click
Restore
to recall the original settings without incorporating the changes� When
completed with the settings on this page, click
Save
to enable the settings�
If you want to configure another sensor setting for day/night/schedule mode, please click
Profile
to
open the Profile of exposure settings page as shown below.
Activated period
: Select the mode this profile will apply to: Day mode, Night mode, or Schedule
mode� Please manually enter a range of time if you choose the Schedule mode� Then check
Save
for the configuration to take effect.
Please follow the steps below to setup a profile:
1� Check
Enable this profile
�
2. Select the applied mode: Day mode, Night mode,
or Schedule mode� Please manually enter a range
of time if you choose Schedule mode�
3. Configure Exposure control settings in the folowing
columns� Please refer to previous dicussions for
detailed information�
4� Click
Save
to enable the setting and click
Close
to
exit the page�
■
WDR Pro
: When enabled, you can select the strength of the WDR function. The Low, Medium,
High options correspond to the level of contrast between the overly-lit area and the shaded areas�
For example, the High option applies to a high contrast scenario� Note that when the exposure
time is set to longer than 1/60 second, the WDR function will be disabled�
