VIVOTEK
54 - User's Manual
■ Disconnect: If you want to break off the current connections, please select them and click this
button� Please note that those checked connections will only be disconnected temporarily and will
automatically try to re-link again (IE Explorer or Quick Time Player)�
Enable access list filtering
: Check this item and click
Save
if you want to enable the access list filtering
function�
Filter
Filter type: Select
Allow
or
Deny
as the filter type. If you choose
Allow Type
, only those clients whose
IP addresses are on the Access List below can access the Network Camera, and the others cannot
access� On the contrary, if you choose
Deny Type
, those clients whose IP addresses are on the Access
List below will not be allowed to access the Network Camera, and the others can access�
Then you can
Add
a rule to the following Access List� Please note that the IPv6 access list column
will not be displayed unless you enable IPv6 on the Network page� For more information about
IPv6
Settings
, please refer to Network > Enable IPv6 on page 57 for detailed information�
There are three types of rules:
Single: This rule allows the user to add an IP address to the Allowed/Denied list�
For example:
