manualshive.com logo in svg

Vivotek FD9182-H, User Manual

Share
Download
Vivotek FD9182-H User Manual Download Page 7

 

 

VIVOTEK

 

User's Manual - 7  

IMPORTANT:

1. The product must be installed and protected in a location that is not easily accessible, and 

is away from impacts or heavy vibration. For example, at the location where the surveillance 

cameras are looking down or installed at high positions such as on a wall, or at least 3 meters 

above the ground.

2. The camera should be installed at least 10 centimeters away from the eave of a building.

3.  If powered by a power adapter, the adapter should be properly grounded. 

4.  Maintenance and repair work must always be carried out by qualified technical personnel. 

5. Disconnect power from the unit when performing a maintenance task.

6.  Please contact VIVOTEK's certified dealers for power adapters. 

Summary of Contents for FD9182-H















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands