Vivotek FD9182-H, User Manual

Page: 231 / 430

VIVOTEK
User's Manual - 231
© 2020 VIVOTEK INC. All Right Reserved
103
NAME VALUE SECURITY
(get/set) DESCRIPTION
* Only available when
"capability_image_c<0~(n-1)>_deinter
lace_support" is 1.
xoffset 0~100 4/4 Adjusting the image to proper
position horizontally.
* Only available when the bit 4 of
capability_image_c<0~(n-1)>_basicset
ting is 1.
yoffset 0~100 4/4 Adjusting the image to proper
position vertically.
* Only available when the bit 5 of
capability_image_c<0~(n-1)>_basicset
ting is 1.
lens_alignment 0~100 4/4 Stitch the sensors together into
focused position.
* Only available when
"capability_image_c<0~(n-1)>_lens_al
ignment" is 1.
lens_ldc_mode <boolean> 4/4 Enable/disable lens distortion
correction.
* Only available when
"capability_image_c<0~(n-1)>_lens_ld
c_support" is 1.
palette_mode Available value is
listed in
"capability_image_c<
0~(n-1)>_palette_mo
de" 1/4 Set color palette option.
* Only available when
"capability_image_c<0~(n-1)>_palette
_support" is 1.
profile_i<0~(m-1)>
_enable <boolean> 4/4 Enable/disable this profile setting
profile_i<0~(m-1)>
_policy night,
schedule
<product dependent>
4/4 The mode which the profile is applied
to.
* Not support "policy=day" anymore
when the version number
© 2020 VIVOTEK INC. All Right Reserved
104
NAME VALUE SECURITY
(get/set) DESCRIPTION
(httpversion) is equal or greater than
0301a.
* "policy=night" is only available when
"capability_daynight_c<0~(n-1)>_sup
port > 0".
profile_i<0~(m-1)>
_begintime hh:mm 4/4 Begin time of schedule mode.
profile_i<0~(m-1)>
_endtime hh:mm 4/4 End time of schedule mode.
profile_i<0~(m-1)>
_brightness
<Not
recommended to
use this>
-5~5,100 4/4 -5: Darker <-> 5: Bright
100: Use "
image_c<0~(n-1)>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1
* We replace "profile_i0_brightness"
with "profile_i0_brightnesspercent".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
profile_i<0~(m-1)>
_contrast
<Not
recommended to
use this>
-5~5,100 4/4 -5: Less contrast <-> 5: More contrast
100: Use "
image_c<0~(n-1)>_contrastpercent"
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.
* We replace "profile_i0_contrast"
with "profile_i0_contrastpercent ".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
profile_i<0~(m-1)> -5~5,100 4/4 -5: Less saturation <-> 5: More