Vivotek FD9182-H User Manual Download

Page: 21 / 430

VIVOTEK

User's Manual - 21

Hardware Reset

The reset button is used to reset the system or restore the factory default settings.

Sometimes resetting the system can return the camera to normal operation. If the system

problems remain after reset, restore the factory settings and install again.

Reset

: Press the recessed reset button. Wait for the Network Camera to reboot.

Restore

: Press and hold the reset button until the status LED rapidly blinks. Note that all

settings will be restored to factory default. Upon successful restore, the status LED will

blink green and red during normal operation.

SD/SDHC/SDXC Card Capacity

This network camera is compliant with

SD/SDHC/SDXC 16GB / 8GB / 32GB / 64GB / ,

and up to 512 / 1024GB

and other preceding standard SD cards.

Summary of Contents for FD9182-H















































































































































































































































































































































































































































Search results

Summary of Contents for FD9182-H

Reviews:

Related manuals for FD9182-H

Brands by name

Popular brands

Vivotek FD9182-H, User Manual

Search results

Summary of Contents for FD9182-H

Reviews:

Related manuals for FD9182-H

Brands by name

Popular brands