VIVOTEK
User's Manual - 15
Fine-tune the Camera Focus
The focus of this network camera is set from 1.0m to infinity by factory default. If you want to
focus on objects closer than 1.0m or the lens has lost focus, please fine tune it in the following
way�
Completion
Tear down the aluminum foil vacuum bag and take out the silica gel� Attach the supplied silica
gel to the inner side of the Network Camera� (Please replace the silica gel with a new one if you
open the back cover after installation�)
Buckle the supplied clamp core onto the RJ45 or M12 cable to against the EMI radiation�
Attach the dome cover to camera� Secure the dome screws with the supplied screwdriver�
Finally, make sure all parts of the camera are securely installed�
1� Loosen the lens lock screw�
2. Manually rotate the lens to fine-tune the focus until the live image is clear.
3� Tighten the lens lock screw�
Tighten the lens lock screw�
Please secure the screws tightly to
prevent the cabling against moisture�
Summary of Contents for FD7160
Page 1: ......
