Vivotek AW-GEV-264A Series, User Manual

Page: 92 / 334

User Manual rev. 1.2. Aug. 2015
92
values.
3-5.2.5.4 Dynamic Table
Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic ARP
Inspection Table contains up to 1024 entries, and is sorted first by port, then by VLAN ID, then
by MAC address, and then by IP address.
Navigating the ARP Inspection Table
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will show
the first 20 entries from the beginning of the Dynamic ARP Inspection Table.
The "Start from port address", "VLAN", "MAC address" and "IP address" input fields allow the
user to select the starting point in the Dynamic ARP Inspection Table. Clicking the button will
update the displayed table starting from that or the closest next Dynamic ARP Inspection Table
match. In addition, the two input fields will - upon a button click - assume the value of the first
displayed entry, allowing for continuous refresh with the same start address.
The will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table. Use the button to
start over.
Web Interface
To configure a Dynamic ARP Inspection Table Configuration in the web interface:
Figure 3-5.2.5.4: The Dynamic ARP Inspection Table
Parameter description:
ARP Inspection Table Columns

Port
Switch Port Number for which the entries are displayed.

VLAN ID
VLAN-ID in which the ARP traffic is permitted.

MAC Address
User MAC address of the entry.

IP Address
User IP address of the entry.

Translate to static