2
Revision History:
* Rev. 1.0: Initial Release
* Rev. 1.1: Updated illumination range and beam angles. Added the
rear panel plug opener.
* Rev. 1.2: Added safety instructions and warning messages.
Package Contents
X3
X1
X2
X2
•
The wall-mount (CMA-B04), corner-mount (AM-412), pole-
mount adaptor (AM-311/312), and other brackets are separately
purchased.
•
The screws and anchors for securing the illuminator to wall are
user-supplied. Apply M6 anchors or screws.
NOTE:
•
Please avoid eye exposure or apply appropriate protection, such as wearing a pair of Infrared
protection glasses, when working with the product. Always use camera live view to oberve IR
lighting effects.
WARNING:
The 1/4" screws and washers are used to secure the illuminator
to an external camera housing.
•
The luminaire should be positioned so that prolonged staring into the luminaire at a distance
closer than 2.5 m is not expected.
•
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged,
the luminaire shall be destroyed.
•
The light source of this luminaire is not replaceable; when the light source reaches its end of life
the whole luminaire shall be replaced.
•
Please make sure Reinforce/Double insulation shall be maintained between LV supply and control
circuits after installation.
•
This flood light shall be used with a IEC/EN 61347-2-13 approved LED driver with SELV output
equal to rated voltage of the luminaire, and output power of LED drivers shall be at least equal to
rated power of the luminaire.
•
Terminal block is not included. Installation may require advice from a qualified personnel.
