Programmable Control Panel
14
Event setting
Event setting includes RS232, IR, I/O, Relay, Delay, Compare, LED, Page, Loop and
Toggle setting. Before set events, an action must be added first. The following
introduction will show you the setting of each event:
RS232 Setting
This item is used for setting the parameters of the programmable control panel
’s serial
ports. Click
“RS232”, it will show as below:
1) The data of RS232 can be directly entered or selected from library. Click
“Change Lib”
to select a library file and open it. Click
“Edit Lib” to create or edit a library file as
below:
Notice:
When editing finish, remember to save the editing, and then press
“OK”.
Send
Type
Send
Port
Enter the serial command for device control.
Create/delete the function
name of the command
Create/open a library
