background image

3

When using electrical appliances, basic safety precautions should be followed to reduce the

risk of fire, electric shock, and injury to persons or property. Read all instructions before using

any appliance.

This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they

have been given supervision or instruction concerning use of the appliance in a safe way and

understand the hazards involved. Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

Do not operate this

or any other appliance with a damaged cord.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent

or a similarly qualified person in order to avoid a hazard.

This ice-cream maker must be positioned so that the plug is accessible.

Connect to properly polarized outlets only. No other appliance should be plugged into the

same outlet. Be sure that the plug is fully inserted into the receptacle.

Do not run the power cord over carpeting or other heat insulators. Do not cover the cord.

Keep cord away from traffic areas, and do not submerge in water.

We do not recommend the use of an extension cord, as it may overheat and become a risk

of fire. If you must use an extension cord, use No.14AWG minimum size and rated no less

than 1875 watts.

Unplug the ice-cream maker before cleaning or making any repairs or servicing.

Exercise caution and use reasonable supervision when appliance is used near children.

Do not use your ice-cream maker outdoors. Place the ice-cream maker away from direct

sunlight and make sure that there is at least 4inches (10 cm) of space between the back of

your unit and wall. Keep a minimum distance of 4inches (10 cm) on each side of your unit

free. Keep the enough air circulation around your unit.

Do not clean your ice-cream maker with flammable fluids. The fumes can create a fire

hazard or explosion.

Do not tip over.

If the ice-cream maker is brought in from outside in wintertime, give it a few hours to warm

up to room temperature before plugging it in.

Children should be supervised to ensure that they do not play with the appliance.

This appliance must be earthed.

Do not store explosive substances such as aerosol cans with a flammable propellant in this

appliance.

This appliance is intended to be used in household and similar applications such as

staff kitchen areas in shops, offices and other working environments;

farm houses and by clients in hotels, motels and other residential type environments;

Summary of Contents for VH762

















Reviews: