10/19
(III)
Call Redial
There is no redial function on this model.
(IV)
Adjusting Speakerphone Volume
1.
Press speakerphone button
2.
Press the Vol+ or Vol- button to increase or decrease the speakerphone volume
3.
Observe the volume bar shown on the LCD
Alternatively, go on to the Web Portal, go to Phone Settings page and adjust the volume
settings (see Figure 11).
(V)
Adjusting Ringing Volume
1.
In idle mode, press the Vol+ or Vol- button to increase or decrease the ringer volume
2.
Observe the volume bar shown on the LCD
Alternatively, go on to the Web Portal, go to Phone Settings page and adjust the volume
settings (see Figure 11).
Figure 11 - Phone Settings Page on Web Portal
(VI)
Call Flash
If the call is on LINE1,
1.
During a conversation using the handset or the speakerphone, press LINE2 button
2.
The previous conversation is automatically put on-hold.
3.
Listen for dial-tone coming from the handset receiver or the speakerphone.
4.
To place another call, simply press the desired number on the keypad and wait for 5 seconds
or press "#" to dial out immediately.
If the call is on LINE2,
1.
During a conversation using the handset or the speakerphone, press LINE1 button
2.
The previous conversation is automatically put on-hold.
3.
Listen for dial-tone coming from the handset receiver or the speakerphone.